LED EMERGENCY DOWNLIGHTS

LED Emergency Downlights are ideal for projects that require low energy/long life LEDs packaged in standard downlight products for plasterboard ceilings, ceiling tiles and solid ceilings.

Options are available for recessing into plasterboard or ceiling tiles, surface mount onto a solid ceiling, track based products and integration within existing luminaires.

LDE3 LED Emergency Downlighter

SELF-CONTAINED LED

ELP Track EM - self-contained track mounted LED downlight — Track EM – Self-Contained Track Mounted LED Downlight

The Track EM unit offers a simple method of providing discreet emergency lighting in areas that require a self-contained solution powered by the existing track system (Eutrac, Global or Stucchi Track).

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Track EM luminaire simply connects to a permanent 230 volt supply via the integral track adaptor to provide effective emergency lighting with 3 hour duration.

Standard Self-Test
Incorporating tried and tested emergency driver technology from the ELP proSeries, the Track EM offers self-contained, non-maintained emergency lighting with integral automatic Self-Test.

Optional DALI
Utilising appropriate Eutrac, Global or Stucchi Track with DALI conductors and a DALI test system (such as the ELP SurePath system) the Track EM/DALI option can provide central DALI testing. Although the unit is offered with non-maintained operation and only uses one DALI address, switchable maintained operation (eg for night or security lighting) is still possible by using the DALI system to switch the LED on or off in mains healthy conditions (the ease of this operation depends upon the DALI system).

DATASHEET

Track EM self-contained track mounted LED downlight — Track EM – Self-Contained Track Mounted LED Downlight

The Track EM unit offers a simple method of providing discreet emergency lighting in areas that require a self-contained solution powered by the existing track system (Eutrac, Global or Stucchi Track).

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Track EM luminaire simply connects to a permanent 230 volt supply via the integral track adaptor to provide effective emergency lighting with 3 hour duration.

Standard Self-Test
Incorporating tried and tested emergency driver technology from the ELP proSeries, the Track EM offers self-contained, non-maintained emergency lighting with integral automatic Self-Test.

Optional DALI
Utilising appropriate Eutrac, Global or Stucchi Track with DALI conductors and a DALI test system (such as the ELP SurePath system) the Track EM/DALI option can provide central DALI testing. Although the unit is offered with non-maintained operation and only uses one DALI address, switchable maintained operation (eg for night or security lighting) is still possible by using the DALI system to switch the LED on or off in mains healthy conditions (the ease of this operation depends upon the DALI system).

DATASHEET

Access self-contained LED downlighter DALI self-test — Access – Self-Contained LED Downlight

The Access self-contained LED Downlighter really does have it all.

The Access unit offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution.

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Access downlight simply requires a permanent 230 Volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

DATASHEET

LDT files

Declaration of Conformity

Access downlight — Access – Self-Contained LED Downlight

The Access self-contained LED Downlighter really does have it all.

The Access unit offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution.

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Access downlight simply requires a permanent 230 Volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

DATASHEET

LDT files

Declaration of Conformity

AccessIP – Self-Contained IP65 rated LED Downlight

The AccessIP unit offers a simple method of providing discreet emergency lighting in areas with harsh environmental conditions that require a surface mounted self-contained solution.

Available with an asymmetrical ‘corridor’ lens for escape routes; a symmetrical wide angle lens for general open areas or a symmetrical narrow beam lens for increased light levels and higher mounting positions. The AccessIP downlight simply requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

DATASHEET

AccessIP – Self-Contained IP65 rated LED Downlight

The AccessIP unit offers a simple method of providing discreet emergency lighting in areas with harsh environmental conditions that require a surface mounted self-contained solution.

Available with an asymmetrical ‘corridor’ lens for escape routes; a symmetrical wide angle lens for general open areas or a symmetrical narrow beam lens for increased light levels and higher mounting positions. The AccessIP downlight simply requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

DATASHEET

LED

LDI LED light pods — Miniature Open Area Downlights (LDI Range)

The LDl3/18 is a small and very discreet LED light pod with an injection moulded thermally conductive plastic body acting as a very effective heat sink and incorporating an 18mm thread and lock nut for simple installation.
NB: Requires 18.5mm clearance hole with access to the rear.

The LDl3/18 light pods (silver or white front bezel) offer two distribution types.

LDl3/18/105 (WIDE BEAM)
The LDl3/18/105 light pod offers 105 degree wide angle lens configuration ideal for illumination of open areas with mounting heights below 3.5m.

LDl3/18/C (‘CORRIDOR’ BEAM)
The LDl3/18/C light pod offers a dissymmetric lens providing a narrow beam across the width of a corridor and extremely wide (batwing) distribution along the length of the corridor.

DATASHEET

LDT files

Declaration of Conformity

LDE3 white — Open Area and Escape Route Downlights (LDE3F Range)

Where projects require the advantages of low energy/long life LEDs packaged in standard downlight products for plasterboard ceilings and ceiling tiles the LDE3F range is the ideal choice.

The LDE3F downlights (white, black or silver thermally conductive plastic) are installed using spring clips into a 45mm diameter cut-out.

The LDE3F range can be supplied with the LDCK330/40 in-line emergency driver kit which can pass through the cut-out into the ceiling void (minimum void depth 175mm).

DATASHEET

LDT files

Declaration of Conformity

LDE3 black — Open Area and Escape Route Downlights (LDE3F Range)

Where projects require the advantages of low energy/long life LEDs packaged in standard downlight products for plasterboard ceilings and ceiling tiles the LDE3F range is the ideal choice.

The LDE3F downlights (white, black or silver thermally conductive plastic) are installed using spring clips into a 45mm diameter cut-out.

The LDE3F range can be supplied with the LDCK330/40 in-line emergency driver kit which can pass through the cut-out into the ceiling void (minimum void depth 175mm).

DATASHEET

LDT files

Declaration of Conformity

SELF-CONTAINED POWER SUPPLIES

LDCK330/40 LED kit — LDCK330/40 Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Non-maintained 350mA ‘SAUSAGE PACK’
Designed specifically to pass through the cut-outs for the LDE3 downlights, the LDCK330/40 non-maintained ‘sausage pack’ offers a one-piece housing for the driver and high temperature nickel cadmium battery.

To ensure simple installation these units comprise a contractor-friendly mains connector and the necessary LED connector for operation of ELP LDE3 downlights and LDI3/18 light pods.

DATASHEET

LDCK700S battery pack — LDCK700S Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Self-contained emergency lighting LED drivers
Driver/charger module and 4.8 volt (4 cell) 1.8Ah AA NiMH battery pack for 3 hour operation of 3 watt (100 lumen) LED light pods.

Battery is connected by a PCB mounted plug.

Module dimensions
130mm (L) x 28mm (W) x 21mm (H)

Battery dimensions
2 x sticks @ 100mm (L) x 15mm (dia) – 500mA version
2 x sticks @ 100mm (L) x 25mm (dia) – 700mA version

LMpro module — Maintained Low Power LED Emergency Equipment with DALI/Self-Test (LMpro)

The LMpro Kits provide maintained (mains and emergency operation) of either one or two LEDs connected in series.

Where a single mains/emergency driver is required with Self-Test or fully interoperable DALI the LMpro modules should be specified.

The LMpro range offers a low-profile charger/ inverter module with High temperature Nickel Cadmium or Nickel Metal Hydride batteries to suit the application. (sub-C cell NiCd batteries are supplied as standard).

LMpro modules are available with or without cable restraints providing an ideal solution for use as built-in or independent control gear. The modules feature high quality constant current driver circuits and integral change-over from the normal mains driver circuit to emergency operation whenever the permanent live supply is lost.

DATASHEET

[swpm_protected format_protected_msg=”1″ custom_msg=’Technical data available to registered users. REGISTER or LOGIN.’]
Declaration of Conformity

[/swpm_protected]

LMpro — Maintained Low Power LED Emergency Equipment with DALI/Self-Test (LMpro)

The LMpro Kits provide maintained (mains and emergency operation) of either one or two LEDs connected in series.

Where a single mains/emergency driver is required with Self-Test or fully interoperable DALI the LMpro modules should be specified.

The LMpro range offers a low-profile charger/ inverter module with High temperature Nickel Cadmium or Nickel Metal Hydride batteries to suit the application. (sub-C cell NiCd batteries are supplied as standard).

LMpro modules are available with or without cable restraints providing an ideal solution for use as built-in or independent control gear. The modules feature high quality constant current driver circuits and integral change-over from the normal mains driver circuit to emergency operation whenever the permanent live supply is lost.

DATASHEET

[swpm_protected format_protected_msg=”1″ custom_msg=’Technical data available to registered users. REGISTER or LOGIN.’]
Declaration of Conformity

[/swpm_protected]

MAINS POWER SUPPLIES

LD-CB emergency control gear — LD-CB – Central Battery LED Emergency Control Gear

Conversion of all modern LED luminaires for connection to central battery emergency supplies.

The LD-CB emergency LED module allows maintained operation of high power LED modules or arrays, when utilising the standard mains voltage LED control gear in-line with the central battery powered emergency LED control module.

The LD-CB central battery module allows for maintained, hold-off or slave operation of high power LED modules or arrays.