Access self-contained LED downlighter DALI self-test
Access self-contained LED downlightAccess self-contained LED downlightAccess self-contained LED downlight

Self-Contained LED Downlight (Access)

The Access self-contained LED Downlighter really does have it all.

Surface AND recessed
Access offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution. The housing collar that is included in the box is either used to provide a surface mounted option or removed to allow recessing.

Wide-angle AND corridor lens
Access is supplied with a ‘clip-in’ symmetrical wide angle lens and asymmetrical ‘corridor’ lens for escape routes.

Self-test AND DALI
As soon as you switch the Access downlighter on it operates as a self-test device. However, connect it to a DALI system and it provides full automatic testing.

DALI and Self-Test logos

The Access downlight simply requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

Datasheet (PDF)
Register to download additional product data including LDT Files, Wiring Diagrams and Certificates of ConformityCLICK HERE


The surface or recessed mounting enclosure houses an ‘intelligent’ proSeries DALI/Self-Test LED driver and a Lithium Iron Phosphate (LiFe) battery. A Nichia ‘3 watt’ high power white LED is mounted in the fascia plate in conjunction with a choice of wide angle or ‘corridor’ distribution lens.

The Lithium Iron battery technology ensures long life without the thermal concerns associated with the more common Nickel Metal Hydride battery technology.

Fully integrated components and the latest software ensure that the Access luminaire can be connected to any approved DALI control system. When the mains supply is initially connected, the Access circuit initiates the Self-Test commissioning mode and then activates the weekly and annual test routine starting at random times to ensure tests do not get carried out simultaneously in the same areas. Faults such as charge failure, battery failure, etc. will be indicated locally by a bi-colour LED. The Access luminaire will continually be prepared for a DALI signal even when operating in Self-Test mode. If a DALI signal is received the Self-Test mode will be disabled and the circuit will adopt full DALI mode.

Incorporating tried and tested emergency driver technology from the ELP proSeries, the Access downlight offers selfcontained, non-maintained operation emergency lighting with integral automatic Self-Test or DALI communication from a single product.

The enclosure may be surface mounted or recessed into the supporting surface. With either mounting option the Access is both discreet and attractive.

Finished in white fire retardant plastic the Access blends in with the other architectural furniture.

The excellent performance allows the units to be mounted at very wide spacings making installation simple and cost effective.

OperationSubjectPlastic housing
EnvironmentalProtection against electric shockClass II
Ingress protectionIP40
Rated operating ambient temperature0 to 350°C
Surface and recess mountingFlammable surfaces and covered
Mains operationRated voltage supply220/240V AC
Mains frequency50/60Hz
Mains supply current20mA
Emergency operationEmergency duration3 hours
Battery recharge period< 24 hours
Battery chargingIntelligent constant voltage
Battery discharge current - nominal375mA
Lumen output150 lumens
Integral test routineEN62034/DALI
MechanicalDimensions (surface)142mm dia x 43mm (h)
Dimensions (recessed)130mm dia cut-out x 43mm (h)
Mains inputunswitched L&N
Mounting Height
Hm (m)
Spacing (m) min
0.5 Lux open area
Spacing (m) min
1 Lux escape area
Spacing (m) min
0.5 Lux open area
Spacing (m) min
1 Lux escape area
Order CodesDescription
ACCESS/NM3White surface/recessed mounted luminaire, self-contained DALI/Self-Test NM3 supplied with 'Corridor' and wide-angle lens