Amenity MAXAmenity MAX

Amenity MAX – IP65 Luminaires

Amenity MAX luminaires provide attractive and robust solutions for providing lighting to walkways, tunnels, storage areas, car parks etc.

The enclosure is sealed to IP65 and houses a geartray, electronic driver and multi-circuit LED board. The polycarbonate lens provides excellent photometric performance (1750 luminaire lumens). The robust cast aluminium and polycarbonate enclosure is vandal resistant and provides protection to IP65/IK10.

Suitable for ambient temperatures of up to 35°C (25°C  for emergency versions) the units are ideal for interior and exterior environments.

Amenity MAX is available in three styles: standard, eyelid and crossblade (see below).

DALI and Self-Test logos

The Amenity MAX luminaires are available with mains only or Maintained emergency operation. All emergency versions provide 3 hour duration from integral high temperature Nickel Cadmium (NiCd) batteries. Amenity MAX is available in three styles: standard, eyelid and crossblade.

Maintained versions can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a complete loss of normal mains supply. (Non-maintained operation is available by excluding a switched live supply).

The benefits of the modern white low power LEDs include long life (typically 50,000hours+), excellent energy efficiency, low operating temperatures therefore improving the life of the internal batteries and good operation at low ambient temperatures.

The Amenity MAX luminaires fully comply to the requirements of EN60598.2.22.

AMENITY MAX - standard
Standard
AMENITY MAX - eyelid
Eyelid
AMENITY MAX - crossblade
Crossblade

These luminaires incorporate high quality mains drivers and separate state of art emergency gear. Therefore, combinations of standard (fixed output) or DALI dimming mains drivers with standard or DALI/Self-Test emergency lighting equipment are possible.

ProductLED Amenity Luminaire
Light sourceSMT LEDs
Luminaire Lumens1750lm (standard), 1400lm (eye)
ConstructionCast aluminium body (and EYE or CDB covers) with polycarbonate opal lens
GeartrayWhite PCB fixed keyhole slots
Dimensions360mm (dia) x 100mm max (H)
Cable entry20mm conduit in back
 
Maintained
Mains only
Light source
Surface mounted white LEDs
Colour temperature
4500K
Luminaire lumens (mains)
1750lm (STD), 1400lm (EYE)
1750lm (STD), 1400lm (EYE)
Lumens (emergency)
375lm (STD), 224lm (EYE)
N/A
IP rating
IP65
Ambient temperature (Ta)
35°C (25°C emergency)
Insulation class
Class I
Supply voltage
230V ~ 50Hz
Supply power
20.8W (STD), 21.4W (EYE)
19.4W (STD), 18.8W (EYE)
Charge power (typical)
3.0W
-
Battery
5 x 2Ah NiCd sub-C cells
-
Weight
3.9kg
3.0kg
Amenity MAX emergency (not EYE)
Mounting Height
Hm (m)
Spacing (m)
min 0.5Lux open area
Spacing (m)
min 1Lux escape
2.0
10.7
7.5
2.5
11.3
7.6
3.0
12.3
7.8
4.0
12.5
8.2
Order CodesDescription
AMAX/STD/M3/BLMaintained with standard mains driver and standard emergency
AMAX/STD/M3D/BLMaintained with standard mains driver and DALI/Self-Test emergency
AMAX/STD/230D/M3/BLMaintained with DALI mains and standard emergency
AMAX/STD/230D/M3D/BLMaintained with DALI mains and DALI/Self-Test emergency
AMAX/STD/230/BLMains only with standard driver
AMAX/STD/230D/BLMains only with DALI driver
OPTIONS:
/MWMicrowave presence detector
/EYE‘Eyelid’ cover (instead of Standard)
/CBD‘Crossblade’ cover (instead of Standard)
/WHWhite body and cover (instead of Black)