Placeholder

LM – LED Maintained DALI/Self-Test Emergency Control Gear

LM Range

The ELP LM range provides maintained (mains and emergency) operation of single high power LEDs (or up to 4 connected in series).

The LM range can be connected to a DALI system, or can function in a stand-alone Self-Test mode.

The control gear incorporates an LED driver circuit, integral charger and a high temperature Nickel Cadmium battery. In the event of a mains failure, the control gear operates the LED (or string of LEDs) at the full light output, for a duration of 3 hours.

DALI Self-Test logos

Categories: ,

The LM range can switch the high power LEDs on and off in mains operation using the switch live input, the range is also DALI switchable in mains operation, if the switched live is present.

The LM control gear is designed for ease of installation offering compact dimensions and push wire terminals. They are also available with cable restraints providing an ideal solution for independent control gear.

In Self-Test mode the function and duration tests will take place at randomised times. NB: If required, testing can be programmed to occur at a designated time by turning the unswitched supply off and on 3 times in 10 seconds at the required time.

Note: All LM modules can be equipped with SurePath BLE Bluetooth addressable Gateway modules.

SECTIONSUBJECT
PLASTIC HOUSED MODULE
EnvironmentalProtection against electric shock
Class III
Secondary outputs - SELV equivalent
Ingress protection
IP20
Module rated operating ambient temperature
-20°C to 50°C
Battery rated operating ambient temperature
0°C to 55°C
Maximum case temperature
60°C
Mains OperationRated voltage supply
220/240V AC
Mains frequency
50/60Hz
Mains supply current
LM80D
LM240D
LM350D
LM500D
LM700D

<20mA
<22mA
<24mA
<28mA
<40mA
Mains supply power
LM80D
LM240D
LM350D
LM500D
LM700D

2.3 watts
2.9 watts
3.6 watts
4.7 watts
6.3 watts
Power factor
>0.6
Module output current
LM80D operating up to 4 x LEDs at 80mA
LM240D operating 1 x LED at 240mA
LM350D operating 1 x LED at 350mA
LM500D operating 1 x LED at 500mA
LM700D operating 1 x LED at 700mA

80mA
240mA
350mA
500mA
700mA
Indicator LED
2 wire bi-colour red/green
Emergency OperationEmergency duration
3 hours
Battery chemistry type
NiCd
Number and type of cells
LM80D
LM240D
LM350D
LM500D
LM700D

3 x 1.5Ah sub-C cells
4 x 800Ah AA cells
3 x 1.8Ah sub-C cells
4 x 1.8Ah sub-C cells
5 x 1.8Ah sub-C cells
Battery recharge period
<24 hours
Battery 2 stage charge - boost/trickle
1.5Ah sub-C cells
800Ah AA cells
1.8Ah sub-C cells

75mA/50mA
40mA/30mA
90mA/60mA
Battery discharge current range (at nominal battery voltage)
1.5Ah sub-C cells
800Ah AA cells
1.8Ah sub-C cells

350mA
200mA
450mA
Battery discharge current range (at nominal battery voltage)
NiCd 1.8Ah sub-C cells
LiFePO4 2.1Ah 26650 cells
LiFePO4 3Ah 26650 cells

360mA to 560mA (450mA)
475mA to 735mA (550mA)
650mA to 1000mA (750mA)
Module output current
LM80D operating up to 4 x LEDs at 80mA
LM240D operating 1 x LED at 240mA
LM350D operating 1 x LED at 350mA
LM500D operating 1 x LED at 500mA
LM700D operating 1 x LED at 700mA

134mA to 19mA ±10%
MechanicalModule outside dimensions
178mm (L) x 30mm (W) x 21mm (H)
Fixing centres
174mm
Electrical connections
Push wire terminals
Standards ComplianceEN61347-1, EN61347-2-7, EN61347-2-13 and EN62384
Yes
EN60598-2-22 (clauses 22.6.7, 22.6.9, 22.6.10, 22.6.11, 22.6.12, 22.6.13, 22.17, 22.18)
Yes
EN62034, EN62386-101, EN62386-102 and EN62386-202
Yes
EN55015 and EN61547
Yes
Marks CE
Yes
 Order CodesDescription
4 x LED at 80mALM80DK3 x 1.5Ah sub-C NiCd cells
1 x LED at 240mALM240DK4 x 800Ah AA NiCd cells
1 x LED at 350mALM350DK3 x 1.8Ah sub-C NiCd cells
1 x LED at 500mALM500DK4 x 1.8Ah sub-C NiCd cells
1 x LED at 700mALM700DK5 x 1.8Ah sub-C NiCd cells or LiFePO4
Suffix: /TUBattery in protective tube for remote mounting
(eg mounting in ceiling void)