LM-CB Emergency Control GearLM-CB Emergency Control Gear

LM-CB 110 – Central Battery LED Emergency Control Gear

The LM-CB 110 central battery emergency LED control gear allows for hold-off or slave operation of low power LED modules. The emergency gear is designed to operate from either a 50V or 110V AC/DC central battery supply, and for hold off operation an unswitched 230V AC mains supply would be required as well.

The LM-CB 110 range can be configured for use with single medium power LEDs or up to 4 low power LEDs wired in series as the output current is selectable on the module.

The LM-CB 110 control gear is designed for ease of installation offering compact dimensions and push wire terminal. They are also available with cable restraints providing an ideal solution for independent control gear for use with recessed LED downlighters such as the LDE range.

Plastic housed module
EnvironmentalProtection against electric shock
Class II
Secondary outputs SELV equivalent
Ingress protection
Module rated operating ambient temperature
-20°C to 50°C
Maximum case temperature
Emergency operationEmergency duration
Dependent on Central Battery System
Module output current
LM-CB110/80 - operating up to 4 x LEDs at 80mA
LM-CB110/500 - operating 1 x LED at 500mA
LM-CB110/700 - operating 1 x LED at 700mA



MechanicalOutside dimensions
(L)178mm x (W) 30mm x (H) 21mm
Fixing centres
Electrical connections
Push wire terminals
Standards ComplianceEN61347-1, EN61347-2-7 and EN61347-2-13 and EN63284
EN60598-2-22 (clauses 22.6.7, 22.6.9, 22.6.10, 22.6.11, 22.6.12, 22.6.13, 22.17, 22.18
EN55015, EN61547

To ensure the correct operation of each type of LED/s the correct LM-CB equipment should be selected. The following codes should be used to order the appropriate module.

Order CodesDescription
LM-CB110LM-CB110 - 110V AC/DC Supply for low power LEDs (Current selectable at module)