Fusion LED/8W T5 Luminaires/Exit Signs

The Fusion range offers an attractive flush mounting luminaire with an optional lens that accommodates a hanging blade exit legend. The luminaires utilise a polycarbonate body and lens and are available with white LED or 8 watt fluorescent light sources.

Ease of installation is assured due to the adjustable arms that swing out and clamp down onto the supporting surface.

The optional exit panel is moulded with a wedge shape to improve the luminance distribution over the legends. The plain lens seals the enclosure to IP65.

Fusion LED luminaires are available with DALI and self-test.

DALI and Self-Test logos

Datasheet (PDF)
Register to download additional product data including LDT Files, Wiring Diagrams and Certificates of ConformityCLICK HERE



The Fusion luminaires are available with 16 x white LEDs or a single 8 watt fluorescent light source with Maintained or mains only operation. (Non-maintained operation is available by excluding a switched live supply).

All emergency versions provide 3 hour duration as standard from integral high temp. Nickel Cadmium batteries.

Maintained versions can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a complete loss of normal mains supply. The hanging blade exit legend panels require a different lens to the plain version and must be ordered as a complete unit.

The benefits of the modern white low power LEDs include long life (typically 50,000 hours+), excellent energy efficiency (>100lm/W), low operating temperatures therefore improving the life of the internal Nickel Cadmium (NiCd) batteries and good operation at low ambient temperatures.

The luminaires fully comply with the requirements of EN60598.2.22 and the low energy consumption assists with compliance with Part L requirements.

DALI / Self-Test Options:
The Fusion LED luminaires can be specified with integral DALI/Self-Test gear providing automatic Self-Test in accordance with BSEN62034 or fully interoperable DALI operation when connected to a DALI control system.

DALI and Self-Test logos

General Specification

ProductBulkhead and Exit Sign
Light Source/D - 16 x white LEDs/F - 8W T5
Luminaire Lumens/D - 135lm/F - 100lm
Sign viewing distance27m (Blade version)
ConstructionPolycarbonate base with linear prism lens
GeartrayHinged white plastic
Cable entry20mm drilling points (polycarbonate)

Operation Specification

Mains only
Light source
/D - 16 x white LEDs /F - 1 x 8 W T5
Luminaire lumens (mains)
/D - 135lm /F - 100lm
/D - 135lm /F - 276lm
Lumens (emergency)
/D - 135lm /F - 100lm
IP rating
FLUSH: IP65 ta25
EXIT: IP20 ta25
Ambient temperature (Ta)
Insulation class
Class I
Supply voltage
230V ~ 50Hz
Supply power
/D - 4.2W /F - 15.5W
/D - 2.4W /F - 11W
Charge power (typical)
/D - 3.6V 1.5Ah NiCd /F - 2.4V 4Ah NiCd

Order Codes

Order CodesDescription
FFD/M3Maintained emergencyLED slim polycarbonate bulkhead with lens
FFD/230Mains onlyLED slim polycarbonate bulkhead with lens
FFF/M3Maintained emergency8 watt slim polycarbonate bulkhead with lens
FFF/230Mains only 8 watt slim polycarbonate bulkhead with lens
FED/M3Maintained emergencyLED recessed bulkhead with exit blade
FED/230Mains only LED recessed bulkhead with exit blade
FEF/M3Maintained emergency8W fluorescent recessed bulkhead with exit blade
FEF/230Mains only 8W fluorescent recessed bulkhead with exit blade
OPTIONS:/DALIDALI or Self-Test emergency operation - (for LED versions only)
BLADE EXIT LEGENDS:/ECAREC Format - Arrow Right/Left
/ECADEC format - Arrow Down
/ISOARISO format - Arrow Right/Left
/ISOAUISO format - Arrow Up

Spacing Table

Mounting Height
Hm (m)
Trans. to wallTrans. to trans.Axial to trans.Axial to axialAxial to wall
1 lux min.
at centre
0.5 lux min.