Amenity LED RoundAmenity LED Round

Amenity Round – IP65 Diecast Luminaire Range

Amenity Round luminaires provide an attractive but robust solution for providing lighting to walkways, tunnels, storage areas, car parks etc.

The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and multi-circuit LED board. The Polycarbonate lens and halo-effect side band provide excellent photometric performance (1250 luminaire lumens).

The robust cast aluminium & polycarbonate enclosure is vandal resistant and IP65 rated. Suitable for ambient temperatures of up to 35°C (25°C for emergency versions) the units are ideal for interior and exterior environments.

DALI and Self-Test logos

The LED Amenity range of luminaires are available with mains only or Maintained emergency operation. All emergency versions provide 3 hour duration as standard from integral high temperature Nickel Cadmium batteries.

Maintained versions can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a complete loss of normal mains supply. (Non-maintained operation is available by excluding a switched live supply.

The benefits of the modern white low power LEDs include long life (typically 50,000 hours+), excellent energy efficiency (>100lm/W), low operating temperatures therefore improving the life of the internal batteries and good operation at low ambient temperatures.

The luminaires fully comply to the requirements of EN60598.2.22.

Amenity LED luminaires are available with DALI and Self-Test.

ProductAmenity Luminaire
Light sourceLED array (2000lm)
Luminaire Lumens1250lm (Tri-guard 1175lm)
ConstructionCast aluminium body with polycarbonate opal lens
GeartrayWhite PCB fixed by two screws
Dimensions300mm (dia) x 100mm (H)
Cable entry20mm holes in back
Mains only
Light source
Surface mount white LEDs (2000 Lumens)
Colour temperature
Luminaire lumens (mains)
1250lm (Tri-guard 1175lm)
1250lm (Tri-guard 1175lm)
Lumens (emergency)
200lm (Tri-guard 235lm)
IP rating
Ambient temperature (Ta)
Insulation class
Class I
Supply voltage
230V ~ 50Hz
Supply power
Charge power (typical)
1 x 6.0V 2.0Ah NiCd
Mounting Height
Hm (m)
Spacing (m)
min 0.5Lux open area
Spacing (m)
min 1Lux escape
Order CodesDescription
15605/M3Maintained with standard mains driver and standard emergency
15605/M3DMaintained with standard mains driver and DALI/Self-Test emergency
15605/230D/M3Maintained with DALI mains and standard emergency
15605/230D/M3DMaintained with DALI mains and DALI/Self-Test emergency
15605/230Mains only
15605/230DMains only with DALI driver
Tri-guard versions
15606/M3Maintained with standard mains driver and standard emergency
15606/M3DMaintained with standard mains driver and DALI/Self-Test emergency
15606/230D/M3Maintained with DALI mains and standard emergency
15606/230D/M3DMaintained with DALI mains and DALI/Self-Test emergency
15606/230Mains only
15606/230DMains only with DALI driver
Contact our sales office regarding optional LiFePO4 versions.