Showing 17–32 of 42 results

LDpro Emergency Equipment with DALI and Self-Test

High Power LED Emergency Equipment with DALI/Self-Test (LDpro)

Easy conversion of all modern LED luminaires plus integral Self-Test or DALI emergency lighting operation.

The LDpro emergency LED control gear allows maintained operation of high power LED modules or arrays when utilising the standard mains voltage LED control gear in-line with the emergency LED control gear.

LDpro modules incorporate a facility to provide automatic Self-Test or fully interoperable DALI interface with an appropriate DALI control system.

LDpro kits incorporate a Self-Test/DALI LED driver/charger module, high temperature Nickel Cadmium (or Nickel Metal Hydride) battery, required connectors and bi-colour indicator.

In the event of a mains failure, an integral relay disconnects the LED lighting load from the mains control gear and then connects it to the emergency control gear which operates the LED module/array at constant power providing a precise Emergency Ballast Lumen Factor throughout the entire duration of 3 hours.

The various high power LED modules utilise different arrays of LEDs connected in series or a combination of series and parallel, and the LDpro range can be configured to suit any of these.

Each LDpro module is configured for a maximum forward voltage and an optimum operating current. The LDpro modules will operate any LED requiring a forward voltage below the maximum rating of the module. However, for the best performance it is recommended that the LDpro module with the rated forward voltage closest to the LED rating is selected.

LD/LDpro Product Selector

Selecting the correct LDpro module can be a tricky business so we’ve developed an app to help you. All you need to know is the forward voltage and forward current for your application. The app will tell you which modules are suitable (in some cases there will be more than one) and also what EBLF figure you can expect to see. CLICK HERE for our LD/LDpro Product Selector.

 

[swpm_protected format_protected_msg=”1″ custom_msg=’Technical data available to registered users. REGISTER or LOGIN.’]


[/swpm_protected]

LD-CO

LD-CO – High Power LED Emergency Equipment

Easy conversion of all modern LED luminaires

LD-CO emergency LED control gear allows maintained operation of high power LED modules or arrays, when utilising the standard mains voltage LED control gear in-line with the emergency LED control gear.

The LD-CO Kits incorporate the appropriate LD-CO driver/charger module, high temperature Nickel-Cadmium (or Nickel Metal Hybride) battery, required connectors and charge indicator. In the event of a mains failure, an integral relay disconnects the LED lighting load from the mains control gear and then connects it to the emergency control gear which operates the LED module/array at constant power providing a precise Emergency Ballast Lumen Factor throughout the entire duration of 3 hours.

The various high power LED modules utilise different arrays of LEDs connected in series or a combination of series and parallel and there will be an ideal LD-CO kit to suit any of these.

Each LD-CO module is configured for a maximum forward voltage and an optimum operating current. The LD-CO module will operate any LED requiring a forward voltage below the maximum rating of the module. However, for the best performance it is recommended that the LD-CO module with the rated forward voltage closest to the LED rating is selected.

Note: For versions offering Self-Test or fully interoperable DALI control and reporting functions please refer to the LDpro range.

LD/LDpro Product Selector

Selecting the correct LD module can be a tricky business so we’ve developed an app to help you. All you need to know is the forward voltage and forward current for your application. The app will tell you which modules are suitable (in some cases there will be more than one) and also what EBLF figure you can expect to see. CLICK HERE for our LD Product Selector.

It is very important to note that some of the LED module manufacturers specifically warn not to operate their products on reduced constant current supplies and the design of the LD-CO conversion equipment has taken this into account.

 

LDCK330/40 LED kit

LDCK330/40 Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Non-maintained 350mA ‘SAUSAGE PACK’
Designed specifically to pass through the cut-outs for the LDE3 downlights, the LDCK330/40 non-maintained ‘sausage pack’ offers a one-piece housing for the driver and high temperature nickel cadmium battery.

To ensure simple installation these units comprise a contractor-friendly mains connector and the necessary LED connector for operation of ELP LDE3 downlights and LDI3/18 light pods.

LDCK700S battery pack

LDCK700S Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Self-contained emergency lighting LED drivers
Driver/charger module and 4.8 volt (4 cell) 1.8Ah AA NiMH battery pack for 3 hour operation of 3 watt (100 lumen) LED light pods.

Battery is connected by a PCB mounted plug.

Module dimensions
130mm (L) x 28mm (W) x 21mm (H)

Battery dimensions
2 x sticks @ 100mm (L) x 15mm (dia) – 500mA version
2 x sticks @ 100mm (L) x 25mm (dia) – 700mA version

LDM module

LDM – LED Array Emergency Control Gear

LDM Range

The ELP ENEC marked LDM emergency LED control gear allows emergency lighting operation of high-power LED modules when used in conjunction with the standard mains voltage LED control gear.

The emergency control gear incorporates a module/charger and a high temperature Nickel Cadmium or Lithium Iron Phosphate (LiFePO4) battery. In the event of a mains failure an integral 2-pole relay disconnects the LED lighting load from the mains control gear and then connects it to the emergency control gear which operates the LED module at an optimum light output for the rated duration.

 

LED Amenity (TLR) IP65 Luminaires DALI and self-test

LED Amenity (TLR) IP65 Luminaires

The LED Amenity TLR luminaire provides an attractive but robust solution for providing lighting to walkways, tunnels, storage areas, car parks etc.

The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and multi-circuit LED board.

The Polycarbonate lens and halo-effect, side band provide excellent photometric performance (1160 luminaire lumens). The robust cast aluminium and polycarbonate enclosure is vandal resistant and provides protection to IP65.

Suitable for ambient temperatures of up to 35°C (25°C for emergency versions) the units are ideal for interior and exterior environments.

LED Amenity TLR luminaires are available with DALI and self-test.

DALI and Self-Test logos

LED Power Supplies

LED Power Supplies

To compliment our LED lighting ranges there are a range of LED driver circuits for mains voltage supplies.

Mains voltage (static inverter) LED drivers
Choose from the LDPSU230 range for one or two 13 watt LEDs.

Placeholder

LM – LED Maintained DALI/Self-Test Emergency Control Gear

LM Range

The ELP LM range provides maintained (mains and emergency) operation of single high power LEDs (or up to 4 connected in series).

The LM range can be connected to a DALI system, or can function in a stand-alone Self-Test mode.

The control gear incorporates an LED driver circuit, integral charger and a high temperature Nickel Cadmium battery. In the event of a mains failure, the control gear operates the LED (or string of LEDs) at the full light output, for a duration of 3 hours.

DALI Self-Test logos

SafepowerSafePower - dimensions

Low Power Static Inverter Systems (SafePower)

The SafePower range offers a choice of mini static inverter power supplies for the operation of a wide range of mains voltage lighting equipment (eg mains voltage GLS & compact fluorescent lamps, small HID, LED etc). The SafePower units are supplied with robust enclosures and utilise high quality 5 year life Valve Regulated Lead Acid batteries. The mini static inverters can be supplied with maintained outputs or used solely as standby supplies.

Maestro Exit SignMaestro Exit Sign

Maestro – Architectural Exit Signs

The Maestro range has been developed to offer a direct replacement for the old ‘metal box’ exit signs and will even cover the area marked on a wall when an old box sign is removed.

Maestro provides an excellent viewing distance of 36 metres and although still a ‘box’ design it is very thin (45mm maximum) and much more attractive than conventional exit boxes.

Maestro Exit Sign luminaires feature attractive polycarbonate enclosures with front and downward illumination via a diffused panel and ‘clip?in’ safety sign legend screens.

The integral rechargeable batteries and charger/driver PCB are mounted on the back surface and the advanced wide angle white LEDs provide even and effective illuminance across the legend.

DALI and Self-Test logos

LMpro moduleLMpro

Maintained Low Power LED Emergency Equipment with DALI/Self-Test (LMpro)

The LMpro Kits provide maintained (mains and emergency operation) of either one or two LEDs connected in series.

Where a single mains/emergency driver is required with Self-Test or fully interoperable DALI the LMpro modules should be specified.

The LMpro range offers a low-profile charger/ inverter module with High temperature Nickel Cadmium or Nickel Metal Hydride batteries to suit the application. (sub-C cell NiCd batteries are supplied as standard).

LMpro modules are available with or without cable restraints providing an ideal solution for use as built-in or independent control gear. The modules feature high quality constant current driver circuits and integral change-over from the normal mains driver circuit to emergency operation whenever the permanent live supply is lost.

[swpm_protected format_protected_msg=”1″ custom_msg=’Technical data available to registered users. REGISTER or LOGIN.’]


[/swpm_protected]

Manta Ceiling Mount - exit sign

Manta IP65 exit sign

The Manta exit sign range has been developed to provide a robust but attractive solution for exterior applications requiring effective safety signage.

Manta signs offer an excellent viewing distance of 36metres via easy to change legends, a robust polycarbonate housing with ratings of IP65/IK08.

NB: Every sign is provided with a retro-fittable second legend plate for ceiling or ‘flag post’ wall mounted double sided installation.

DALI Self-Test LiFePO4

Maxim LED exit-sign DALI self-testMaxim LED Exit Signs - white

Maxim – Long-Life LED Exit Signs

The Maxim LED exit sign is an attractive, specifiable product that offers long life and low energy with excellent performance. These very slim wall mounted luminaires feature a welded steel housing providing a ‘picture frame’ appearance around the bright and evenly illuminated safety sign panel.

The Maxim exit sign luminaires provide smaller physical dimensions than conventional fluorescent exit signs making installations more attractive. However, the Maxim LED exit signs still provide a useful 25 metre viewing distance.

The back plate mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover then simply hooks onto the back plate and is retained with a single fixture at the base.

The front cover is supplied in textured white as standard and a textured silver grey finish is also available.

Maxim LED exit signs are available with DALI and self-test.

DALI and Self-Test logos

MetaLED - LED Exit Sign Luminaires

MetaLED – Wall Mounted LED Exit Sign

The MetaLED range provides excellent viewing distances of 36 metres from a conventional package but with the advantage of using long life, low energy LEDs as a light source. The benefits of the modern white low power LEDs include long life (typically 50,000 hours+), excellent energy efficiency, low operating temperature therefore improving the life of the internal batteries and good operation at low ambient temperatures.

MetaLED exit sign luminaires feature epoxy coated steel enclosures with screen printed opal polycarbonate legend panels enclosing integral rechargeable batteries and a PCB fitted with advanced wide angle white LEDs and efficient driver circuit.

Custom epoxy body colours can be made available to special order.

Mexodus architectural LED exit-signs DALI and self-testMexodus Exit Sign

Mexodus – Architectural LED Exit Sign

Very high sign luminance – ideal for brightly lit environments

The Mexodus range of high quality LED exit sign luminaires is perfectly suited to modern architectural environments. Offering ease of installation, these exit sign luminaires have an attractive flat design with the exit legend being framed by a high quality aluminium extrusion measuring just 237 x 137mm.

The specially screened light-conducting panel ensures a uniform illumination and due to their high luminance of >500cd/m2 are ideal for use in brightly lit environments.

Along with their slim design and three different mounting options, Mexodus luminaires are DALI addressable and offer countless possibilities for the seamless integration of lumen efficient exit signage into existing structures and new installations.

DALI Self-Test LiFePO4

Mezzolite emergency lighting exit sign DALI self-testMezzolite emergency lighting exit sign ISO format

MezzoLite – LED Exit Sign

The MezzoLite LED Emergency Lighting Exit Sign provides an excellent viewing distance of 30 metres. Although still a ‘box’ design it offers much better aesthetics when compared to conventional emergency lighting exit sign boxes.

MezzoLite Exit Sign luminaires feature attractive Polycarbonate enclosures with a sloping front opal panel and screen printed safety sign legends.

The integral rechargeable batteries and charger/driver PCB are mounted on the back surface and the advanced wide angle white LEDs provide even and effective illuminance across the legend.

MezzoLite is available with DALI and Self-Test.

DALI and Self-Test logos