Showing 1–16 of 42 results

Access self-contained LED downlighter DALI self-testAccess downlight

Access – Self-Contained LED Downlight

The Access self-contained LED Downlighter really does have it all.

The Access unit offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution.

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Access downlight simply requires a permanent 230 Volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

 

DALI and Self-Test logos


AccessIP – Self-Contained IP65 rated LED Downlight

The AccessIP unit offers a simple method of providing discreet emergency lighting in areas with harsh environmental conditions that require a surface mounted self-contained solution.

Available with an asymmetrical ‘corridor’ lens for escape routes; a symmetrical wide angle lens for general open areas or a symmetrical narrow beam lens for increased light levels and higher mounting positions. The AccessIP downlight simply requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

 

DALI Self-Test LiFePO4

Amenity MAXAmenity MAX LED luminaires

Amenity MAX – IP65 Luminaires

Amenity MAX luminaires provide attractive and robust solutions for providing lighting to walkways, tunnels, storage areas, car parks etc.

The enclosure is sealed to IP65 and houses a geartray, electronic driver and multi-circuit LED board. The polycarbonate lens provides excellent photometric performance (1750 luminaire lumens). The robust cast aluminium and polycarbonate enclosure is vandal resistant and provides protection to IP65/IK10.

Suitable for ambient temperatures of up to 35°C (25°C  for emergency versions) the units are ideal for interior and exterior environments.

Amenity MAX is available in three styles: standard, eyelid and crossblade (see below).

DALI and Self-Test logos

Amenity LED RoundAmenity Round Tri-guard

Amenity Round – IP65 Diecast Luminaire Range

Amenity Round luminaires provide an attractive but robust solution for providing lighting to walkways, tunnels, storage areas, car parks etc.

The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and multi-circuit LED board. The Polycarbonate lens and halo-effect side band provide excellent photometric performance (1250 luminaire lumens).

The robust cast aluminium & polycarbonate enclosure is vandal resistant and IP65 rated. Suitable for ambient temperatures of up to 35°C (25°C for emergency versions) the units are ideal for interior and exterior environments.

DALI and Self-Test logos

Amenity LED Square

Amenity Square – IP65 Diecast Luminaire Range

The LED Amenity range of luminaires provide an attractive but robust solution for providing lighting to walkways, tunnels, storage areas, car parks etc. The enclosure is sealed to IP65 and houses a geartray with HF electronic driver and multi-circuit LED board. The Polycarbonate lens and halo-effect side band provide excellent photometric performance (1420 luminaire lumens). The robust cast aluminium and polycarbonate enclosure is vandal resistant and provides protection to IP65. Suitable for ambient temperatures of up to 35°C (25°C for emergency versions) the units are ideal for interior and exterior environments.

LED Amenity luminaires are available in round or square housings and with DALI and self-test options.

DALI and Self-Test logos

Aviator-HO LED emergency bulkheadAviator-HO LED emergency bulkhead

Aviator-HO LED – IP65 high light output luminaires

Supplied with an IP65 rated off-white polycarbonate base and attractive polycarbonate fresnel lens, Aviator-HO LED luminaires provide 800 lumen output. The fresnel lens creates cost effective opportunities to minimise the number of luminaires required within an installation.

Aviator-HO luminaires can be surface mounted or semi-recessed and are ideal for exterior and industrial applications where higher illuminance levels are required.

DALI Self-Test logos

Axiom LED Bulkhead exit sign DALI self-test

Axiom – IP65 LED Bulkhead/Exit Sign

The Axiom LED bulkhead exit sign utilises an IP65 rated polycarbonate base and fresnel lens housing 16 high output white LEDs and constant current maintained drive circuit.

The luminaire provides 150 lumens and the lens generates a wide intensity distribution ideal for providing good illuminance on the escape route. The polycarbonate lens can be fitted with 100mm high, self-adhesive safety signs.

A deep (150mm) opal diffuser is also available to provide double-sided signage if required.

Axiom is available with DALI and self-test.

DALI and Self-Test logos


LD-CO

Central Battery LED Emergency Control Gear (LD-CB)

Conversion of all modern LED luminaires for connection to central battery emergency supplies.

The LD-CB emergency LED module allows maintained operation of high power LED modules or arrays, when utilising the standard mains voltage LED control gear in-line with the Central Battery powered emergency LED control module.

The LD-CB Central Battery module allows for maintained, hold-off or slave operation of high power LED modules or arrays.

The emergency gear is designed to operate from an 110V AC/DC Central Battery supply. For maintained operation, an integral relay disconnects the LED lighting load from the mains control gear and then connects it to the emergency control gear, which operates the LED module/array at a reduced light output from the central battery supply.

The various high power LED modules utilise different arrays of LEDs connected in series or a combination of series and parallel, and the LD-CB range can be configured to suit any of these (output current selectable on the module).

It is important to note that for maintained operation some of the LED module/array mains drivers should not be operated with an open circuit load.

To overcome this problem when first powering up or when switching between emergency and mains operations the LD-CB module features a live in/live out relay which ensures the load is in place before the mains driver is powered up.

 

 

[button link=”http://www.elp.uk.com/wp-content/uploads/2016/07/LD-CODS-04-16.pdf” style=”download” bg_color=”#DBE120″ border=”#2E3192″ text=”dark” window=”yes”]Datasheet (PDF)[/button]

LD-CO

Central Battery LED Emergency Control Gear (LM-CB)

The LM-CB 110 central battery emergency LED control gear allows for hold-off or slave operation of low power LED modules. The emergency gear is designed to operate from either a 50V or 110V AC/DC central battery supply, and for hold off operation an un-switched 230V AC mains supply would be required as well.

The LM-CB 110 range can be configured for use with single medium power LEDs or up to 4 low power LEDs wired in series as the output current is selectable on the module.

The LM-CB 110 control gear is designed for ease of installation offering compact dimensions and push wire terminal. They are also available with cable restraints providing an ideal solution for independent control gear for use with recessed LED down-lighters such as the LDE range.

 

[button link=”http://www.elp.uk.com/wp-content/uploads/2016/07/LD-CODS-04-16.pdf” style=”download” bg_color=”#DBE120″ border=”#2E3192″ text=”dark” window=”yes”]Datasheet (PDF)[/button]

Central Battery Systems

Central Battery Systems
(50V and 110V)

A wide range of Central Battery Units and Static Inverter Units are available to suit specific project demands. All units utilise high quality ten year life Valve Regulated Lead Acid batteries or low maintenance twenty five year life Vented Nickel Cadmium batteries and the systems are specifically designed for emergency lighting applications.

Slave versions of the standard luminaire range can be ordered plus standard mains luminaires can be converted for connection to Central Systems by using the 50 volt and 110 volt slave inverters.

ELP Elegance LED Fluorescent IP65 Circular BulkheadElegance LED On

Elegance – IP65 LED Circular Luminaire

The Elegance range offers mains and emergency lighting from a stylish luminaire with a white polycarbonate base and opal polycarbonate diffuser sealed to IP65.

The luminaires are supplied with a unique lever release for the diffuser which provides access to the control gear and light sources which are mounted on a removable geartray. The diffuser release lever can be locked using a screw which increases the tamper/vandal resistance where required.

Options include integral DALI/Self-Test (the emergency operation will operate in Self-Test mode unless connected to a DALI test system when the luminaire will revert to fully interoperable DALI control). Elegance luminaires can also be specified as DALI mains or DALI mains plus DALI emergency.

DALI and Self-Test logos



Finesse LED exit sign DALI self-test

Finesse – Slim LED Bulkhead Luminaires

The Finesse range offers an attractive, slim, IP rated enclosure suitable for semi-flush or surface mounting with white LED light sources. Finesse luminaires utilise a polycarbonate body and lens with linear prisms providing wide intensity distribution.

Finesse luminaires are available with an alternative lens which has a slot retaining an injection moulded legend blade.

Finesse LED is available with DALI and self-test.

DALI and Self-Test logos


Fusion LED 8W T5 Exit signs

Fusion LED Bulkhead and Exit Sign

The Fusion range offers an attractive flush mounting luminaire with an optional lens that accommodates a hanging blade exit legend. The luminaires utilise a polycarbonate body and lens and are available with white LED light sources.

Ease of installation is assured due to the adjustable arms that swing out and clamp down onto the supporting surface.

The optional exit panel is moulded with a wedge shape to improve the luminance distribution over the legends. The plain lens seals the recessed enclosure to IP65 (IP21 for EXIT version).

Fusion LED luminaires are available with DALI and self-test.

DALI and Self-Test logos

LDR3 LED Light Pods

High Output LED Light Pods (LDR3 Range)

The LDR3 combines three high output 1 Watt LEDs in a clever reflector/lens assembly providing over 300 Lumens in total. The 45° beam angle intensity distribution will suit most applications providing even illuminance on the floor from a wide range of mounting heights.

The LDR3 units are suitable for mounting in most readily available MR16/50 Watt Tungsten Halogen luminaires and the design incorporates excellent thermal control ensuring that the LED junction temperatures are kept at optimal levels providing life expectancy of over 40,000 hours.