Showing all 9 results

Access self-contained LED downlighter DALI self-testAccess downlight

Access – Self-Contained LED Downlight

The Access self-contained LED Downlighter really does have it all.

The Access unit offers a simple method of providing discreet emergency lighting in areas that require a surface mounted or recessed self-contained solution.

Supplied with a ‘clip-in’ symmetrical wide angle lens or asymmetrical ‘corridor’ lens for escape routes (both supplied) the Access downlight simply requires a permanent 230 Volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

 

DALI and Self-Test logos


AccessIP – Self-Contained IP65 rated LED Downlight

The AccessIP unit offers a simple method of providing discreet emergency lighting in areas with harsh environmental conditions that require a surface mounted self-contained solution.

Available with an asymmetrical ‘corridor’ lens for escape routes; a symmetrical wide angle lens for general open areas or a symmetrical narrow beam lens for increased light levels and higher mounting positions. The AccessIP downlight simply requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

 

DALI Self-Test LiFePO4

LDR3 LED Light Pods

High Output LED Light Pods (LDR3 Range)

The LDR3 combines three high output 1 Watt LEDs in a clever reflector/lens assembly providing over 300 Lumens in total. The 45° beam angle intensity distribution will suit most applications providing even illuminance on the floor from a wide range of mounting heights.

The LDR3 units are suitable for mounting in most readily available MR16/50 Watt Tungsten Halogen luminaires and the design incorporates excellent thermal control ensuring that the LED junction temperatures are kept at optimal levels providing life expectancy of over 40,000 hours.

 

LDCK330/40 LED kit

LDCK330/40 Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Non-maintained 350mA ‘SAUSAGE PACK’
Designed specifically to pass through the cut-outs for the LDE3 downlights, the LDCK330/40 non-maintained ‘sausage pack’ offers a one-piece housing for the driver and high temperature nickel cadmium battery.

To ensure simple installation these units comprise a contractor-friendly mains connector and the necessary LED connector for operation of ELP LDE3 downlights and LDI3/18 light pods.

LDCK700S battery pack

LDCK700S Downlight Power Supply

To compliment our LED lighting ranges we offer LED driver circuits for self-contained emergency lighting packs.

Self-contained emergency lighting LED drivers
Driver/charger module and 4.8 volt (4 cell) 1.8Ah AA NiMH battery pack for 3 hour operation of 3 watt (100 lumen) LED light pods.

Battery is connected by a PCB mounted plug.

Module dimensions
130mm (L) x 28mm (W) x 21mm (H)

Battery dimensions
2 x sticks @ 100mm (L) x 15mm (dia) – 500mA version
2 x sticks @ 100mm (L) x 25mm (dia) – 700mA version

LED Power Supplies

LED Power Supplies

To compliment our LED lighting ranges there are a range of LED driver circuits for mains voltage supplies.

Mains voltage (static inverter) LED drivers
Choose from the LDPSU230 range for one or two 13 watt LEDs.

LDI LED light pods

Miniature Open Area Downlights (LDI Range)

The LDl3/18 is a small and very discreet LED light pod with an injection moulded thermally conductive plastic body acting as a very effective heat sink and incorporating an 18mm thread and lock nut for simple installation.
NB: Requires 18.5mm clearance hole with access to the rear.

The LDl3/18 light pods (silver or white front bezel) offer two distribution types.

LDl3/18/105 (WIDE BEAM)
The LDl3/18/105 light pod offers 105 degree wide angle lens configuration ideal for illumination of open areas with mounting heights below 3.5m.

LDl3/18/C (‘CORRIDOR’ BEAM)
The LDl3/18/C light pod offers a dissymmetric lens providing a narrow beam across the width of a corridor and extremely wide (batwing) distribution along the length of the corridor.


LDE3 whiteLDE3 black

Open Area and Escape Route Downlights (LDE3F Range)

Where projects require the advantages of low energy/long life LEDs packaged in standard downlight products for plasterboard ceilings and ceiling tiles the LDE3F range is the ideal choice.

The LDE3F downlights (white, black or silver thermally conductive plastic) are installed using spring clips into a 45mm diameter cut-out.

The LDE3F range can be supplied with the LDCK330/40 in-line emergency driver kit which can pass through the cut-out into the ceiling void (minimum void depth 175mm).

DALI and Self-Test logos


LD/SM self-contained LED downlighter with DALI and self-testLD/SM Self-Contained LED Downlights

Self-Contained LED Downlights (LD/SM Range)

The LD/SM range offers a simple method of providing discreet emergency lighting in areas that require a surface mounted self-contained solution.

Available with a symmetrical wide angle lens or the asymmetrical ‘corridor’ lens for escape routes the LD/SM just requires a permanent 230 volt supply to provide effective non-maintained emergency lighting with 3 hour duration.

The LD/SM range of self-contained LED downlighters is also available with DALI and self-test operation.

DALI and Self-Test logos