Showing all 2 results

PS-SS200 Infrared Sensor

Infrared Motion Detector Sensor (PS-SS200)

The PS-SS200 sensor is an active motion detector with adjustable sensitivity, daylight detection and ‘On’ period. The detector utilises an infrared sensor to detect thermal movement within the detection zone. An internal microprocessor then triggers and connects a Live supply to the lighting loads connected to the detector (‘On’ command).

The PS-SS200 infrared detector is designed for installation in ceilings up to 3.5metres high and movement can be detected within quite large detection zones (up to 10 metres diameter).

The PS-SS200 infrared detector is ideal for switching one or more lighting loads local to the detector when someone enters an area.

While there is movement in the area, the sensor will hold the load on. The sensor can be adjusted so that when movement stops the load will switch off after 8 seconds to 12 minutes.

PS-RS02 Microwave Motion Detector

PS-RS02 – Microwave Motion Detector

The PS-RS02 sensor is an active motion detector with adjustable sensitivity, daylight detection and ‘On’ period. The detector emits high-frequency electro-magnetic energy (5.8GHz) and receives the echo from movements in the detection zone. An internal microprocessor then triggers and connects the load to the supply (‘On’ command).

The advantage of Microwave detectors is that movement can be detected at quite long distances (up to 10m) and is possible through thin metal and typical materials used in buildings (office partitions, etc.).

Microwave detectors are ideal for switching lighting loads and can be used for switching lights on or (by using dimming ballasts) from a dimmed level to full output when someone enters an area.

While there is movement in the area, the sensor will hold the load on. The sensor can be adjusted so that when movement stops the load will switch off (or return to dimmed level) after 8 seconds to 12 minutes.