Menu
Navigator Bulkhead Luminaires

Navigator – Bulkhead Luminaires

The Navigator series provides a high quality IP65 rated, full size polycarbonate bulkhead luminaire with a choice of fresnel lens or opal polycarbonate diffuser.

The Navigator is supplied as standard with 100 lumen output but the High Light output version provides 180 lumens which, when fitted with the fresnel lens, creates opportunities to minimise the number of luminaires required within an installation.

Navigator luminaires can be surface mounted or semi-recessed and exit sign legends can be applied for safety sign applications.

Datasheet (PDF)
Register to download additional product data including LDT Files, Wiring Diagrams and Certificates of ConformityCLICK HERE

 

Categories: , Tags: ,

Description

The Navigator luminaires are available with Maintained, Non-maintained or mains only operation.

All emergency versions provide 3 hour duration as standard from integral high temperature Nickel Cadmium batteries. Maintained versions can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a complete loss of normal mains supply. Combined versions provide the same operation utilising separate lamps for mains and emergency.

Accessories such as self-adhesive pictogram legend panels, semi-recessing bezels and tamper-proof screws are available to complete the range.

The luminaires fully comply to the requirements of EN60598.2.22

DALI / Self-Test Options:
The Navigator LED luminaires can be specified with integral DALI/Self-Test gear providing automatic Self-Test in accordance with BSEN62034 or fully interoperable DALI operation when connected to a DALI control system.

General Specification

ProductBulkhead Luminaire
Light source8Watt T5
Luminaire lumens100lm/180lm (emergency) 400lm (mains only)
ConstructionStandard:White Polycarbonate base and clear fresnel lens
/HL High Light:White Polycarbonate base and clear fresnel lens
GeartrayHinged white painted steel
Dimensions370mm (L) x 137mm (W) x 88mm (H)
Cable Entry200mm drilling points in both ends and back plate

Operation Specification

 
Non-maintained
Maintained
Mains only
Light source
1 x 8 watt T5
Colour temperature
4000K
Luminaire lumens (mains)
- Standard
-
400lm
400lm
- /HL High Light
-
400lm
400lm
Luminaire lumens (emergency)
- Standard
100lm
100lm
-
- /HL High Light
180lm
180lm
-
IP rating
IP65
Ambient temperature (Ta)
25°C
Insulation class
Class I
Supply voltage
230V ~ 50Hz
Supply power (mains)
- Standard
15.5W
15.0W
11.0W
- /HL High Light
16.0W
16.0W
11.0W
Charge power (typical)
2.6W
Battery
2.4V 4Ah or 3.6V 4Ah NiCd
Weight
- Standard
1.5kg
1.8kg
1.5kg
- /HL High Light
1.7kg
2.0kg
1.5kg

Order Codes

Order CodesDescription
NV/NM3Non-maintained 8 watt polycarbonate bulkhead with fresnel lens
NV/M3Maintained 8 watt polycarbonate bulkhead with fresnel lens
NV/230Mains only 8 watt polycarbonate bulkhead with fresnel lens
NV/C3Combined 8 watt with fresnel lens (mains and separate emergency)
HIGHLIGHT VERSIONS
NV/NM3/HLAs NV/NM3 but with HighLight output inverter/battery
NV/M3/HLAs NV/M3 but with HighLight output maintained inverter/battery
OPTIONS:/OP Opal Diffuser; /RB Semi-recessing Bezel; /WG Wire Guard;
/DALI DALI or Self-test emergency operation
SELF-ADHESIVE SIGN KITS:/NV/LEG/KIT/ECEC Format Self-adhesive kit
/NV/LEG/ISOARISO Format Self-adhesive kit - Arrow Right
/NV/LEG/ISOALISO Format Self-adhesive kit - Arrow Left
/NV/LEG/ISOAUISO Format Self-adhesive kit - Arrow Up

Spacing Table

 Mounting Height
Hm (m)
Trans. to wallTrans. to trans.Axial to trans.Axial to axialAxial to wall 
Worst case (standard/opal)
2.51.24.54.13.91.0
1 lux min.
at centre
4.00.51.41.31.20.6
2.52.77.36.56.22.2
0.5 lux min.
(open)
4.02.07.46.56.31.7
Best case (HighLight fresnel)
2.53.09.28.15.42.0
1 lux min. at centre
4.02.48.74.64.31.4
2.55.112.510.66.52.6
0.5 lux min.
(open)
4.04.412.610.86.92.2