Menu
IM Integrated Modules

Integrated Conversion Equipment (IM)

The Integrated Modules incorporate a high quality electronic ballast and an emergency lighting inverter within the same enclosure. The module should be connected to a permanent 230 volt supply to charge the Nickel Cadmium or Nickel Metal Hydride batteries. A second switched mains supply then provides normal lighting. In the event of a failure of the permanent supply the lamp continues to operate from the battery.

There are two physically different modules. One is ideally suited to the wide range of circular and square compact fluorescent luminaires which utilise the 28Watt or 38 watt 2D lamps.

The second is designed to fit in the gearbox associated with compact fluorescent downlights. There are different calibrations for various lamp wattages but in all cases the circuits are designed to generate less heat than standard fluorescent control gear helping to maintain optimum battery temperatures within the small enclosures.

2D VERSIONS

IM Integrated Modules are suitable for operation of all 16 – 38 watt 2D lamps including T5 and Amalgam.

Datasheet (PDF)
Register to download additional product data including LDT Files, Wiring Diagrams and Certificates of ConformityCLICK HERE

 

Description

Ideally suited for the wide range of compact fluorescent downlights there are IM modules for single or twin 13Watt, 18 watt, 26 watt, 32 watt and 42 watt PL lamps designed to make the wiring of new luminaires or conversion of existing luminaires fast and cost effective. Utilising the same technology as the single 2D versions these models have the added advantage of being suitable for operation of one or two lamps from the same module. Under normal mains conditions the internal ballast will operate one or two lamps at full output and when the normal supply fails one lamp will automatically provide emergency lighting operation from the associated Nickel Cadmium or Nickel Metal Hydride battery.

It should be noted that the IM modules for single and twin PL lamps are slightly larger than the 2D versions but are still ideally suited to fit in a typical larger existing gear box or in a bespoke remote enclosure.

Dimensions: 132mm (L) x 114mm (W) x 30mm (H)

Fixing Centres: 126mm